中文版 English


  Home » NEWS » Company News » p-terphenyl MSDS


p-terphenyl MSDS

 

1.       CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
 
PRODUCT NAME :
p-Terphenyl
MANUFACTURER :
Hangzhou terphenyl Lcd co;ltd 
SUPPLIER :
  SUPPLIER(In china) :hangzhou terphenyl Lcd co;ltd
  ADDRESS :BINWEN road, hangzhou city,china
  
 

2.       COMPOSITION/INFORMATION ON INGREDIENTS
 
CHEMICAL NAME :
p-Terphenyl
SYNONYMS :
p-Diphenylbenzene; Santowax P; p-Triphenyl
FORMULA :
  C18H14
MOLECULAR WEIGHT :
  230.30
CAS NUMBER :
92-94-4
TSCA INVETORY :
Listed
EINECS No. :                   
202-205-2
IDENTIFICATION OF DANGER ; 
SYMBOL :
 -----
R-phrases :
 -----
 

3.       HAZARDS IDENTIFICATION
 
May be harmful if inhaled and ingested.
May cause eye and skin irritation.
Combustible. 
 

4.       FIRST AID MEASURES
 
GENERAL ADVICE :
Wash off immediately with soap and plenty of water. In the case of respirable dust and/or fumes, use self-contained breathing apparatus and dust impervious    protective suit. Use personal protective equipment.
 
INHALATION :
Move victim to fresh air. If breathing is difficult, give oxygen. If irritation persists, consult a physician.
SKIN CONTACT  
 
 
Remove contaminated clothes and shoes, rinse skin with plenty of water or shower. Use soap to help assure removal. If irritation persists, consult a physician.
EYE CONTACT :
Remove any contact lenses at once. Flush eyes well with flooding amounts of running water for at least 15 minutes. Assure adequate flushing by separating the eyelids with sterile fingers. If irritation persists, consult a physician.
INGESTION :
Rinse mouth, give plenty of water to dilute the substance. Never give anything by mouth to an unconscious person. Consult a physician.
 

5.       FIRE FIGHTING MEASURES
 
EXTINGUISHING MEDIA :
Carbon dioxide, dry chemical powder, foam, water
FIRE & EXPLOSION HAZARDS :
Flammable solid. Hazardous, toxic and irritating dust or smoke may be emitted.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS :
Firemen should wear normal protective equipment(full bunker gear)and positive-pressure self-contained breathing apparatus.
 

6.       ACCIDENTAL RELEASE MEASURES
 
PERSONAL PRECAUTIONS :
Remove ignition sources and ventilate area. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid raising dust and avoid contact with skin and eyes.
ENVIRONMENTAL PRECAUTIONS :
Prevent spills from entering sewers, watercourses or low areas.
METHODS FOR CLEAN UP :
Do not touch spilled material without suitable protection(See section 8). After material is completely picked up, wash the spill site with soap and water and ventilate the area. Put all wastes in a plastic bag for disposal and seal it tightly. Remove, clean, or dispose of contaminated clothing.
 

7.       HANDLING AND STORAGE
 
Research use only. 
HANDLING :
Avoid contact with eyes, skin and clothing. Avoid prolonged or repeated exposure. Handle material with suitable protection away from source of heat or ignition and use non-sparking type tools.
STORAGE :
Store away from sunlight in well-ventilated dry place at room temperature. Keep container tightly closed.
INCOMPATIBLE PRODUCTS :
Oxidizers
 

8.       EXPOSURE CONTROLS/PERSONAL PROTECTION
 
ENGINEERING MEASURES :
Use exhaust ventilation to keep airborne concentrations below exposure limits. Use only with adequate ventilation.
VENTILATION :
Local Exhaust ; Necessary,  Mechanical(General) ; Recommended
CONTROL PARAMETER :
 
 
        OSHA Final Limits :
None established
        ACGIH TLV(s) :
 
 
PERSONAL PROTECTION ; 
    Respiratory protection :
NIOSH/MSHA approved respirator
    Hand protection :
Chemical resistant gloves
    Eye protection :
Safety glasses(goggles)
    Skin protection :
Protective clothing
 

9.       PHYSICAL AND CHEMICAL PROPERTIES
 
APPEARANCE :
 white, crystals - crystalline powder
ODOR :
Characteristic sweet odor
pH :
Not available
BOILING POINT :
383 °C
MELTING POINT :
212-214 °C
FLASH POINT :
207 °C
FLAMMABILITY (solid, gas) :
Combustible
DECOMPOSITION TEMPERATURE :
Not available
EXPLOSIVE LIMITS :
Not available
VAPOR PRESSURE :
Not available
 
 
SOLUBILITY IN ; 
    WATER :
Practically insoluble
    BENZENE :
Soluble
    ETHER :
Freely soluble
    CARBON DISULFIDE :
Freely soluble
    ALCOHOL :
Soluble
    ACETIC ACID :
Slightly soluble
log Po/w :
Not available
 

10.    STABILITY AND REACTIVITY
 
CONDITION TO AVOID :
Sunlight, heat, open flames, high temperature, sparks, static electrical charge, other ignition sources
INCOMPATIBILITY(MATERIAL TO AVOID) :
Oxidizers
HAZARDOUS DECOMPOSITION PRODUCTS :
Carbon monoxide may be formed.
HAZARDOUS POLYMERIZATION :
Will not occur.
 

11.    TOXICOLOGICAL INFORMATION
 
 
 
IRRITATION DATA :
Not available
MUTATION DATA :
Not available
REPRODUCTIVE EFFECTS DATA :
Not available
TUMORIGENIC DATA :
Not available
 
ADDITIONAL INFORMATION ; 
NTP :
Not listed
IARC :
Not listed
OSHA :
Not listed
ACGIH :
Not listed
 
12Ecological Information
 
NOT AVAILABLE
 
13.    TRANSPORT INFORMATION
 
IATA :
Not Restricted.
DOT(Department of Transportation) :
Not a Hazardous Material for DOT shipping.
 
14.    Disposal Considerations
 
Dispose of in a manner consistent with federal, state, and local regulations.
 


Copyright © 2003 CCCHEM HANGZHOU CHINA